Advanced Portable Units

Vehicle Tracking
CUSTOMISED FOR YOUR NEEDS

Using our custom solutions, Digicore goes the next step and builds custom-looms and boxes to fully meet the IVMS specifications of a site, to offer full compliance in a plug-and-play, easy to use, portable unit.

With a Digicore portable IVMS solution you have the option of picking up and having full functionality of any and/or all of the following.

• Enforceable Driver ID
• Panic button with send immediate messaging over email and SMS
• Seatbelt pickup and monitoring with optional in-cab alerts
• Plug-and-play Iridium communications functionality and/or upgradability
• Hundreds of geo-zones with the option their own speed-zones storable on the unit
• Fatigue/journey management with optional in-cab warning and alerts
• Monitor harsh events such as – harsh cornering, harsh acceleration and harsh braking with optional in-cab alerts
• Top speed with optional in-cab alerts
• Impact and rollover detection with send immediate messaging over email and SMS
• Maintenance scheduling based on km travelled and/or time intervals
• Vehicle utilisation reports

SPECIFICATIONS

Connectivity
  • LTE-M / NB-IoT – uBlox SARA-R410M Modem operates on all major global LTE-M and NB-IoT bands

     Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26*, 28 (*roaming bands)

  • Bluetooth® 5.0 Gateway – Bluetooth 5.0 gateway reports nearby Bluetooth tags and sensors for affordable tagged asset management and sensor monitoring
  • SIM Size & Access – Internal Nano 3FF SIM
Location
  • Module – uBlox EVA-M8
  • Constellation – Concurrent GPS /GLONASS
  • Channels – 72 Channel High Sensitivity Receiver
  • Tracking Sensitivity – -167dBM industry-leading tracking performance
  • GNSS Assistance – GNSS almanac data for greater sensitivity and position accuracy
  • Low Noise Amplifier – GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail
Power
  • Input Voltage – 8-45V DC (max)
  • Self-Resetting Fuse – Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems
  • Operating Current – ~25/50mA when moving ~150mA battery charging
  • Sleep Current – <2mA
  • Backup Battery – 1100mAh LiPo internal backup battery pack
Mechanics / Design
  • Dimensions – 125 x 65 x 30 mm (4.92 x 2.56 x 1.18”)
  • Weight – 250 g (8.82 oz)
  • Housing – ABS Polycarbonate Plastic. Non-branded housing for optional white-labelling
  • Installation – 24 Pin Connector provided as standard
  • Operating Temperature – -30°C to +60°C (connected to external power) At <0°C and >+40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures
  • Cellular Antenna – Internal
  • GPS Antenna – Internal
  • RF Antenna – Internal
  • 3-Axis Accelerometer – 3-Axis Accelerometer to detect movement, high G-force events, and more
  • Diagnostic LED – Diagnostic LED indicates operation status
  • Flash Memory – Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging
  • Internal Buzzer – Internal buzzer fitted for audible alerts for speeding, harsh driving, driver ID reminders, error conditions, input feedback, and other events
Interfaces
  • Analog Inputs 

    1x 0-30V Analog Inputs,

    Auto Ranging, 12-bit ADC

    0-5V range: 1.22mV precision

   0-30V range: 7.32mV precision

  • Digital Inputs

   6 x digital inputs with configurable pull-up/down

   0-48V DC input range

 On/Off thresholds:

   Pull-up enabled: low at 0.8V, high at 1.0V

   Pull-down enabled: low at 2.0V, high at 2.4V

  • Digital Outputs

   2 xSwitched Ground Digital Outputs

   Easily wired up to switch external lights, relays, buzzers, etc

   Can be used to immobilise a vehicle

  • Ignition

   1 x dedicated ignition digital input 0-48V DC

   5V on/off threshold

  • RS-232 – Can be used to connect IridiumEdge® Module or interface with controllers and other sensors
  • Switched Power Out

    Outputs are either 5V (external power connected) or Vbatt (no external power)

    MaxCurrent: 400mA

    The G120 can provide power to external peripherals, eliminating the need for additional external power supplies

  • TTL Interface – Serial interface used to connect a Digital Matter RFID reader for Driver ID
  • Wiegand – The G120’s Wiegand Interface enables easy integration with a variety of RFID card types and readers. Existing employee access badges or IDs can be used with a Wiegand reader for driver ID, permission-based actions, and theft prevention, eliminating the hassle of issuing additional ID cards or fobs
  • 1-Wire® or iButton® – 1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats
Smarts
  • Auto-APN – Auto-APN allows the device to analyse the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
  • Accident & Rollover Detection – Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident
  • Driver ID Options – RFID, iButton® or Wiegand interface for Driver ID, access control, and logbooking. Wiegand interface supports many third-party readers to read nearly any ID card type
  • Driver Safety & Behaviour – Monitor speeding, harsh acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles
  • Geofence Alerts – The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
  • Geofence Download to Device – Geofences can be downloaded directly to the device fromTelematics Guru for enhanced location-based actions and alerts. Maximum of 750 Geofences with up to 100 points per geofence
  • GPS Jamming Detection – GPS Jamming or Interference can be detected and alerted on
  • In-Vehicle Alerts – Can be wired up to external buzzers or lights for in-vehicle alerts
  • Lone Worker Safety – Interface a variety of duress pendants to enable man-down alerts for lone worker safety monitoring
  • Out-of-Cellular-Coverage Tracking – Fit the G120 with an optional IridiumEdge® Module using the RS232 connection to track assets in remote areas outside of cellular coverage
  • TTL Interface – Serial interface used to connect a Digital Matter RFID reader for Driver ID
  • Wiegand – The G120’s Wiegand Interface enables easy integration with a variety of RFID card types and readers. Existing employee access badges or IDs can be used with a Wiegand reader for driver ID, permission-based actions, and theft prevention, eliminating the hassle of issuing additional ID cards or fobs
  • 1-Wire® or iButton® – 1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats
Smarts
  • Auto-APN – Auto-APN allows the device to analyse the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
  • Accident & Rollover Detection – Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident
  • Driver ID Options – RFID, iButton® or Wiegand interface for Driver ID, access control, and logbooking. Wiegand interface supports many third-party readers to read nearly any ID card type
  • Driver Safety & Behaviour – Monitor speeding, harsh acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles
  • Geofence Alerts – The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
  • Geofence Download to Device – Geofences can be downloaded directly to the device fromTelematics Guru for enhanced location-based actions and alerts. Maximum of 750 Geofences with up to 100 points per geofence
  • GPS Jamming Detection – GPS Jamming or Interference can be detected and alerted on
  • In-Vehicle Alerts – Can be wired up to external buzzers or lights for in-vehicle alerts
  • Lone Worker Safety – Interface a variety of duress pendants to enable man-down alerts for lone worker safety monitoring
  • Out-of-Cellular-Coverage Tracking – Fit the G120 with an optional IridiumEdge® Module using the RS232 connection to track assets in remote areas outside of cellular coverage
  • Preventative Maintenance – Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
  • Real-Time Tracking – Device remains continuously connected while on the move for real-time asset tracking
  • Remote Worker Safety – Interface a variety of duress pendants to enable man-down alerts for remote (out of-coverage) worker safety monitoring

    *Requires IridiumEdge® Module

  • Remote Immobilisation – Digital outputs can be connected to a relay to enable remote immobilisation of vehicles and equipment in the case of theft, abuse, or unauthorised usage
  • Run Hour Monitoring – Calculate run hours and distance traveled (odometer) to understand and optimise asset utilisation
  • Sensor Monitoring – Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more
  • Tamper Alerts – Instant alert if the device is removed from your asset or disconnected from its power source
  • Theft Recovery – Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
Device Management
  • Flexible Configuration – Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
  • Device Management Platform – Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
  • Configuration App – Configurable with DMLink provisioning tool
Integration
  • Third-Party Integration – TCP Direct or HTTPS Webhook
Security
  • Data Security – Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security
Warranty
  • Manufacturer’s Warranty – Two-year manufacturer’s warranty
Certifications
  • LTE-M / NB-IoT -FCC, ISED, Bluetooth® Certified, CE (Doc)

Please contact our support team for a full list of compliance specifications and documentation for your region.

CONTACT US